(1)

In accordance with Article 12 of Directive 2014/68/EU of the European Parliament and of the Council (2), pressure equipment or assemblies referred to in Article 4(1) and (2) of that Directive which are in conformity with harmonised standards or parts thereof, the references of which have been published in the Official Journal of the European Union, are to be presumed to be in conformity with the essential safety requirements covered by those standards or parts thereof referred to in Annex I to that Directive.

(2)

By letter M/071 of 1 August 1994 the Commission made a request to the European Committee for Standardization (CEN) for drawing up, in relation to the pressure equipment, the product related standards and the standards of a horizontal nature in support of Directive 97/23/EC of the European Parliament and of the Council (3). That Directive was replaced by Directive 2014/68/EU without changing the essential safety requirements referred to in Annex I to Directive 97/23/EC.

(3)

On the basis of the request M/071 CEN drafted new harmonised standards EN ISO 4126-2:2019 for safety devices for protection against excessive pressure, EN ISO 15494:2018 for plastics piping systems for industrial applications and EN ISO 21028-2:2018 for cryogenic vessels. Standard EN ISO 21028-2:2018 is a new standard replacing EN 1252-2:2001. In order to reflect the state of the art, CEN amended and revised some of the existing standards. Specifically, CEN amended standards EN 13445-2:2014, EN 13445-3:2014, EN 13445-5:2014 and EN 13445-6:2014 for unfired pressure vessels, and standards EN 13480-2:2017 and EN 13480-5:2017 for metallic industrial piping. CEN also revised standards EN 1562:2012 and EN 1563:2011 for cast iron, standards EN 12516-1:2014 and EN 12516-4:2014 for industrial valves and standard EN 13136:2013 for refrigerating systems and heat pumps.

(4)

The Commission together with the CEN has assessed whether the standards on the pressure equipment as drafted, amended or revised by CEN comply with the request M/071.

(5)

The standards on the pressure equipment as drafted, amended or revised by CEN satisfy the requirements which they aim to cover and which are referred to in Annex I to Directive 2014/68/EU. It is therefore appropriate to publish the references of those standards in the Official Journal of the European Union.

(6)

References of amended or revised versions of standards are to be published for the standards EN 13445-2:2014, EN 13445-3:2014, EN 13445-5:2014, EN 13445-6:2014, EN 13480-2:2017, EN 13480-5:2017, EN 1562:2012, EN 1563:2011, EN 12516-1:2014, EN 12516-4:2014 and EN 13136:2013. Standard EN 1252-2:2001 is to be replaced by a new standard. It is therefore necessary to withdraw from the Official Journal of the European Union (4) references of the standards EN 13445-2:2014, EN 13445-2:2014/A1:2016, EN 13445-2:2014/A2:2018, EN 13445-3:2014, EN 13445-3:2014/A1:2015, EN 13445-3:2014/A2:2016, EN 13445-3:2014/A3:2017, EN 13445-3:2014/A4:2018, EN 13445-5:2014, EN 13445-6:2014, EN 13480-2:2017, EN 13480-5:2017, EN 1252-2:2001, EN 1562:2012, EN 1563:2011, EN 12516-1:2014, EN 12516-4:2014 and EN 13136:2013. In order to provide the manufacturers with sufficient time to adapt their products to the new standards for cryogenic vessels and the revised standards for cast iron, industrial valves and refrigeration systems and heat pumps, it is necessary to defer the withdrawal of the references of those standards.

(7)

Compliance with a harmonised standard confers a presumption of conformity with the corresponding essential requirements set out in Union harmonisation legislation from the date of publication of the reference of such standard in the Official Journal of the European Union. This Decision should therefore enter into force on the day of its publication,